Lietuvos Ford Mondeo klubas

Diskusijų forumas

Mondeo III. Klimato diagnostikos rezimas

Manualai

Mondeo III. Klimato diagnostikos rezimas

Standartinė Diji » 2008 11 09 , 22:39

Instructions

Activation of self-diagnosis
On the E(A)TC module, PRESS the "OFF" and "FOOTWELL" buttons simultaneously for at least 2 seconds, then PRESS "AUTO" within 1.5 seconds.

The self-diagnosis which then starts lasts a few seconds. An animated display appears in the E(A)TC display during this time. Any faults found are displayed in the form of trouble codes. Example: First of all, "93" flashes for 2 seconds, then "42" flashes for 2 seconds - DTC 9342. If no faults are stored, then all of the segments in the display are actuated.

Diagnosis mode can be stopped at any time by PRESSING any button on the E(A)TC module.

Note: If the "DEFROST" button is pressed to end the diagnosis mode, all DTCs in the fault memory will be deleted!

Fault Codes

Self-test code B1200 / 9200
Description Internal control module fault
Action CLEAR fault memory. If the fault occurs again after a functional test, RENEW the E(A)TC module


Self-test code B1242 / 9242
Description Circuit of heater flap control
Action Go to Pinpoint Test D motor, recirculated air fault


Self-test code B1251 / 9251
Description Open circuit in interior
Action Go to Pinpoint Test M temperature sensor circuit


Self-test code B1253 / 9253
Description Short circuit in interior
Action Go to Pinpoint Test M temperature sensor circuit (short to ground)


Self-test code B1261 / 9261
Description Short circuit in sun load sensor
Action Go to Pinpoint Test L circuit (short to ground)


Self-test code B1262 / 9262
Description Circuit of defrost actuator motor
Action Go to Pinpoint Test E, faulty


Self-test code B1263 / 9263
Description Circuit of dashboard/footwell
Action Go to Pinpoint Test F actuator motor faulty


Self-test code B1342 / 9342
Description Internal control module fault
Action CLEAR fault memory. If the fault occurs again after a functionalÃ?Â?Ã?Â? test, RENEW the E(A)TC module


Self-test code B1676 / 9676
Description Power supply voltage outside
Action CHECK charging system. For further tolerance information Section 414-00 If the charging system is OK, Go to Pinpoint Test J


Self-test code B2266 / A266
Description Air temperature flap positioning
Action Go to Pinpoint Test G motor circuit faulty


Self-test code B2297 / A299
Description Open circuit in the footwell outlet
Action Go to Pinpoint Test H temperature sensor circuit


Self-test code B2298 / A307
Description Short circuit in the footwell
Action Go to Pinpoint Test H outlet temperature sensor circuit(short to ground)


Self-test code A297
Description Open circuit in the dashboard
Action Go to Pinpoint Test I outlet temperature sensor circuit


Self-test code A298
Description Short in the dashboard outlet
Action Go to Pinpoint Test I temperature sensor circuit (short to ground)


Self-test code B2308 / A308
Description Interior temperature sensor blower
Action Go to Pinpoint Test N circuit faulty


Self-test code B2516 / A516
Description Heater blower control module
Action Go to Pinpoint Test K circuit faulty


B)
Diji
 


Re: Mondeo III. Klimato diagnostikos rezimas

Standartinė velnys007 » 2012 04 30 , 21:52

ar galetumet isverst ka reiketu tikrint kas cia per gedimas ismeta du kodus 1242 ir 9253
velnys007
 

Re: Mondeo III. Klimato diagnostikos rezimas

Standartinė marksistas » 2012 05 01 , 10:43

velnys007 rašė:ar galetumet isverst ka reiketu tikrint kas cia per gedimas ismeta du kodus 1242 ir 9253


Pabandyk pradžioje jas ištrinti. jei panaudojus klimą vėl atsiras. tada jau ieškok bėdų sklende darinėjamčiame varikliuke. Bet manau jei tūrėtum bėdų tai nepustų arba pastoviai pustų karštą orą
PaveikslėlisPaveikslėlisPaveikslėlis

2.0 TDDI Ghia
Ex. MkIII welcome to S-MAX world
Vartotojo avataras
marksistas
Klubo remėjas
 
Pranešimai: 714
Užsiregistravo: 2009 03 15 , 21:19
Miestas: Vilnius
Lytis: Vyras
Mondeo karta: MkIV
Kuro tipas: Dyzelinas
Spalva: Mėlyna

Re: Mondeo III. Klimato diagnostikos rezimas

Standartinė geris » 2014 11 20 , 23:04

gal galit isverst ka reiskia 1262 klaida?

Self-test code B1262 / 9262
Description Circuit of defrost actuator motor
Action Go to Pinpoint Test E, faulty
geris
 


Grįžti į Naudinga



Dabar prisijungę

Vartotojai naršantys šį forumą: Registruotų vartotojų nėra ir 1 svečias

Sukasi ant phpBB® Ford Mondeo Klubas © Prižiūri Fresher • Vertė Vilius Šumskas © 2003, 2005, 2007